Citation:

Rutvik Patel, Pritesh B Patel , 2022. "A Review on Mechanical System Reliability & Maintenance strategies for Maximizing Equipment Lifespan", ESP Journal of Engineering & Technology Advancements, 2(1): 173-179.

Abstract:

Reliability assessment is vital to guarantee the effectiveness, safety, and longevity of mechanical systems, particularly in industrial applications where downtime and failures can result in significant operational and financial losses. Mechanical failures, often caused by fatigue, stress corrosion, wear, and brittle fracture, pose challenges to system reliability and maintenance. This study presents a comprehensive approach to reliability optimization by integrating predictive, preventive, and reliability-centered maintenance strategies. Key methodologies include Analysis of Failure Modes and Effects (FMEA), dependability, availability, maintenance, and safety (RAMS), and importance measures to identify critical failure modes and optimize resource allocation. Furthermore, advanced data-driven techniques are employed to enhance failure prediction and optimize maintenance scheduling. By addressing key challenges in mechanical reliability, this research provides a framework for cost-effective and data-driven maintenance strategies, contributing to improved system performance, reduced downtime, and sustainable industrial operations.

References:

[1] G. Di Bona, A. Forcina, A. Petrillo, F. De Felice, and A. Silvestri, “A-IFM reliability allocation model based on multicriteria approach,” Int. J. Qual. \& Reliab. Manag., vol. 33, no. 5, 2016.

[2] W. Zhi-Ming and Y. Jian-Guo, “Bounded intensity process and its applications in reliability assessment of NC machine tools,” J. Shanghai Jiaotong Univ., vol. 46, no. 10, p. 1622, 2012.

[3] W. Dai, Y. Chi, Z. Lu, M. Wang, and Y. Zhao, “Research on Reliability Assessment of Mechanical Equipment Based on the Performance–Feature Model,” Appl. Sci., vol. 8, no. 9, 2018, doi: 10.3390/app8091619.

[4] M. Zhao and J. Lin, “Health Assessment of Rotating Machinery Using a Rotary Encoder,” IEEE Trans. Ind. Electron., vol. 65, no. 3, pp. 2548–2556, Mar. 2018, doi: 10.1109/TIE.2017.2739689.

[5] Z.-M. Wang, J.-G. Yang, G.-Q. Wang, and G.-B. Zhang, “Reliability assessment of multiple NC machine tools with minimal repair,” Harbin Gongye Daxue Xuebao(Journal Harbin Inst. Technol., vol. 43, no. 7, pp. 127–130, 2011.

[6] S.-I. Sung and B.-J. Yum, “Optimal design of step-stress accelerated degradation tests based on the Wiener degradation process,” Qual. Technol. \& Quant. Manag., vol. 13, no. 4, pp. 367–393, 2016.

[7] B. Bertsche, Reliability in Automotive and Mechanical Engineering. Berlin, Heidelberg: Springer Berlin Heidelberg, 2008. doi: 10.1007/978-3-540-34282-3.

[8] W. You, A. Saidi, A. Zine, and M. Ichchou, “Mechanical Reliability Assessment by Ensemble Learning,” Vehicles, vol. 2, no. 1, pp. 126–141, 2020, doi: 10.3390/vehicles2010007.

[9] S. K. Au and J. L. Beck, “First excursion probabilities for linear systems by very efficient importance sampling,” Probabilistic Eng. Mech., vol. 16, no. 3, pp. 193–207, 2001.

[10] L. Chen, M. Kou, and S. Wang, “On the Use of Importance Measures in the Reliability of Inventory Systems, Considering the Cost,” Appl. Sci., vol. 10, no. 21, 2020, doi: 10.3390/app10217942.

[11] K. Edward, K. Beata, K. Dariusz, and M. Dariusz, “Survival function in the analysis of the factors influencing the reliability of water wells operation,” Water Resour. Manag., vol. 33, pp. 4909–4921, 2019.

[12] E. Kozłowski, D. Mazurkiewicz, B. Kowalska, and D. Kowalski, “Application of a Multidimensional Scaling Method to Identify the Factors Influencing on Reliability of Deep Wells,” in Advances in Intelligent Systems and Computing, 2019, pp. 56–65. doi: 10.1007/978-3-319-97490-3_6.

[13] C. Zhang and Y. Zhang, “Common Cause and Load-Sharing Failures-based Reliability Analysis for Parallel Systems,” Eksploat. i Niezawodn. – Maint. Reliab., vol. 22, no. 1, pp. 26–34, Mar. 2020, doi: 10.17531/ein.2020.1.4.

[14] B. Cai et al., “Multi-source information fusion based fault diagnosis of ground-source heat pump using Bayesian network,” Appl. Energy, vol. 114, pp. 1–9, 2014.

[15] Y. P. Manshin and E. Y. Manshina, “Reliability in mechanical systems projects,” J. Phys. Conf. Ser., vol. 2131, no. 2, p. 2021, 2021, doi: 10.1088/1742-6596/2131/2/022029.

[16] Y. Yuanfan, “The Study on Mechanical Reliability Design Method and Its Application,” Energy Procedia, vol. 17, pp. 467–472, 2012, doi: 10.1016/j.egypro.2012.02.122.

[17] R. Arora, S. Gera, and M. Saxena, “Impact of Cloud Computing Services and Application in Healthcare Sector and to provide improved quality patient care,” IEEE Int. Conf. Cloud Comput. Emerg. Mark. (CCEM), NJ, USA, 2021, pp. 45–47, 2021.

[18] V. Thakran, “Environmental Sustainability in Piping Systems : Exploring the Impact of Material Selection and Design Optimisation,” Int. J. Curr. Eng. Technol., vol. 11, no. 5, pp. 523–528, 2021.

[19] K. Sharma and S. Srivastava, “Failure Mode and Effect Analysis (FMEA) Implementation: A Literature Review,” J. Adv. Res. Aeronaut. Sp. Sci., vol. 5, 2018.

[20] Jesper Liedberg, “From reactive maintenance towards increased proactiveness through digitalisation,” Jonkoping University, 2021.

[21] E. I. B. I. H. A. R. H. A.-S. S. Kamaruddin, “Journal of Quality in Maintenance Engineering Volume 23 issue 2 2017 [doi 10.1108_JQME-04-2016-0014] Basri, Ernnie Illyani; Abdul Razak, Izatul Hamimi; Ab-Samat, Has -- Preventive Maintenance (PM) p.pdf,” 2017.

[22] V. M. Z. Wickern, “Challenges and Reliability of Predictive Maintenance,” Rhein Waal University, 2019. doi: 10.13140/RG.2.2.35379.89129.

[23] Z. Sajaradj, L. N. Huda, and S. Sinulingga, “The Application of Reliability Centered Maintenance (RCM) Methods to Design Maintenance System in Manufacturing (Journal Review),” IOP Conf. Ser. Mater. Sci. Eng., vol. 505, no. 1, 2019, doi: 10.1088/1757-899X/505/1/012058.

[24] A. Syamsundar, V. N. A. Naikan, and S. Wu, “Estimating maintenance effectiveness of a repairable system under time-based preventive maintenance,” Comput. Ind. Eng., vol. 156, p. 107278, 2021, doi: ttps://doi.org/10.1016/j.cie.2021.107278.

[25] Y. Li, C. Zhu, and Z. Wang, “Reliability Analysis and Imprecise Component Importance Measure of Redundant Systems of OWTs Based on Component Swapping,” Appl. Sci., vol. 10, no. 4, 2020, doi: 10.3390/app10041432.

[26] A. A. Shittu, A. Kolios, and A. Mehmanparast, “A Systematic Review of Structural Reliability Methods for Deformation and Fatigue Analysis of Offshore Jacket Structures,” Metals (Basel)., vol. 11, no. 1, 2021, doi: 10.3390/met11010050.

[27] F. J. Á. García and D. R. Salgado, “Maintenance Strategies for Industrial Multi-Stage Machines: The Study of a Thermoforming Machine,” Sensors, vol. 21, no. 20, 2021, doi: 10.3390/s21206809.

[28] J. Pan, Y. Jiang, Y. Wei, S. Chen, and W. Chen, “Research on Condition-based opportunistic Maintenance Strategy for Mechanical System,” in 2021 Global Reliability and Prognostics and Health Management, PHM-Nanjing 2021, 2021. doi: 10.1109/PHM-Nanjing52125.2021.9612854.

[29] A. H. Nithin, S. Sriramula, and T. Ebinum, “Reliability-centered maintenance and cost optimization for offshore oil and gas components,” J. Phys. Conf. Ser., vol. 1730, no. 1, 2021, doi: 10.1088/1742-6596/1730/1/012007.

[30] Z. Chen et al., “Mission Reliability-Oriented Selective Maintenance Optimization for Intelligent Multistate Manufacturing Systems with Uncertain Maintenance Quality,” IEEE Access, 2019, doi: 10.1109/ACCESS.2019.2933580.

[31] F. Chen et al., “Research on imperfect preventive maintenance strategy for turret system of the CNC lathe,” in 2016 11th International Conference on Reliability, Maintainability and Safety (ICRMS), IEEE, Oct. 2016, pp. 1–4. doi: 10.1109/ICRMS.2016.8050075.

[32] Y.-J. Yang et al., “Applying Reliability Centered Maintenance (RCM) to Sampling Subsystem in Continuous Emission Monitoring System,” IEEE Access, vol. 8, pp. 55054–55062, 2020, doi: 10.1109/ACCESS.2020.2980630.

Keywords:

System Reliability, Maintenance Strategies, Equipment Lifespan, Predictive Maintenance, Preventive Maintenance, Reliability-Centered Maintenance (RCM).